Victorian Consolidated Regulations

8 Reg. 9.2.1: S.R. No. 127/2000 as amended by S.R. No. 96/2005. - SECT 3.5.8.

Provision of information to manufacturer

3.5.8. Provision of information to manufacturer

A designer of plant must ensure, when the design of the plant is made
available to the manufacturer, that the manufacturer of the plant is provided
with information to enable the plant to be manufactured in accordance with the
design specifications and, if applicable, with information relating to-

   (a)  the installation, commissioning, decommissioning, use, transport,
        storage and, if the plant is capable of being dismantled, dismantling
        of the plant; and

   (b)  the hazards and any risk associated with the use of the plant
        identified in accordance with this Division; and

   (c)  testing or inspections to be carried out on the plant; and

   (d)  the systems of work and competency of operators that are necessary for
        the safe use of the plant; and

   (e)  the emergency procedures (if any) that are required to be implemented
        if there is a malfunction of the plant.

Note Act compliance-section 27 (see regulation 1.1.7).