New South Wales Repealed RegulationsThis legislation has been repealed.
- Made under the Mines Inspection Act 1901
- As at 1 September 2008
- Reg 552 of 2000
TABLE OF PROVISIONS
PART 1 - PRELIMINARY
1. Name of General Rule
2. Commencement
3. Definitions
4. Notes
5. Application of General Rule
PART 2 - RISK MANAGEMENT AT MINES
Division 1 - Document control
6. Keeping of records
7. Register of permits
8. Replacement of lost, stolen or damaged permits
Division 2 - Strategic planning and policy
9. Mine safety management plan
10. Occupational safety and health policy
11. Contractor safety management plan
Division 3 - Safety responsibilities
12. Safety responsibilities—responsibilities of general manager
13. Safety responsibilities—responsibilities of supervisors
14. Safety responsibilities—responsibilities of workers
15. Appointment and functions of employee representatives or check inspectors
16. Control of persons at mine
17. Offence to remain at mine after direction to leave
18. Damage or misuse of certain things prohibited
Division 4 - Safety management
19. Risk management strategies
20. Major hazard management procedures
Division 5 - Emergency response planning
Note
21. Planning for emergencies
22. First aid
23. Reporting of emergencies
Division 6 - Safety inspections and checks
24. Safety inspections and checks
Division 7 - Injury, illness and incident reporting
25. Certain serious accidents and dangerous incidents to be reported to Director-General by the Inspectorate
26. Records to be kept of certain accidents
27. Terms of reference of Boards of Inquiry
28. Report on occupational safety and health performance
PART 3 - PEOPLE
Division 1 - Consultation and communication
29. Attention to safety and health matters
30. Effective means of communication to be provided
Division 2 - Fitness for work
31. Fitness for work procedure required
32. Alcohol and drugs
Division 3 - Provision of safety, health and welfare amenities
33. Provision of health surveillance
34. Provision of safety apparel and protective devices
35. Provision of toilet facilities and change rooms
36. Provision of drinking water
37. Provision of weather protection
Division 4 - Environmental monitoring
38. General environment for working
39. Ventilation
40. Plans of ventilation
41. Checking of ventilation
42. Disused workings
43. Noise management—particular risk control measures
PART 4 - WORK ENVIRONMENT
Division 1 - Safety and stability of mine workings
44. Mine safety and stability
45. Particular safety measures
46. Assessment and control of risk of substantial movement of unbroken ground
47. Assessment and control risk of inrush
Division 2 - Buildings and structures
48. Buildings and structures—safety and health
49. Inspector or mine safety officer to examine plans and specifications
Division 3 - Waste materials
50. Waste materials—safety and health
Division 4 - Hazardous substances
51. Definitions
52. Chemicals—general
53. Hazardous substances—safety and health
54. Hazardous substances—health surveillance
55. Hazardous substances—documentation
56. (Repealed)
57. Carcinogenic substances
58. Hazardous chemicals
Division 5 - Explosives
59. Dealing with explosives
60. Manufacture of explosives
61. Storage of explosives
62. Blasting operations by shotfirers
63. Blasting operations for which shotfirers not required
64. Danger from blasting
65. Misfires
66. Problems or faults in explosives
Division 6 - Energy
67. Safe use of energy
68. Requirements as to electricity
69. Requirements as to compressed air, hydraulic pressure and steam
70. Requirements as to liquefied petroleum gas and natural gas
Division 7 - Equipment and machinery
71. Equipment and machinery—safety and health
72. Maintenance and guarding of, and access to, equipment and machinery
73. Isolation of equipment or machinery under repair
74. Modifications, alterations or repairs
PART 5 - SHAFTS AND WINDING
75. Shafts and winding—safety and health
76. Inspector or mine safety officer to be notified of proposed construction of shafts
77. Precautions during construction and use
78. Winding systems
79. Automatic winding systems—additional provisions
80. Shaft conveyances
PART 6 - SAVINGS
81. Savings provision
SCHEDULE 1
SCHEDULE 2