ELECTRICITY SAFETY (CORROSION PROTECTION) REGULATION 2003 - REG 5 Operation of corrosion protection systems requires approval
This legislation has been repealed.
ELECTRICITY SAFETY (CORROSION PROTECTION) REGULATION 2003 - REG 5
Operation of corrosion protection systems requires approval5 Operation of corrosion protection systems requires approval
(1) A person must not operate a corrosion protection system to which this Regulation applies unless the system is the subject of an approval.Maximum penalty: 200 penalty units, in the case of a body corporate, or 50 penalty units in any other case.
(2) A person must not operate a corrosion protection system to which this Regulation applies otherwise than in accordance with the conditions of an approval to which the system is subject.Maximum penalty: 200 penalty units, in the case of a body corporate, or 50 penalty units in any other case.
(3) This clause does not apply to a person operating a corrosion protection system:(a) for the purpose of testing it, but only for not more than a total of 24 hours after completion of:(i) the installation or extension of the system, or(ii) any maintenance or repairs carried out on the system, or(b) with the written consent of the Director-General.