New South Wales Consolidated Regulations

STATE ENVIRONMENTAL PLANNING POLICY (EXEMPT AND COMPLYING DEVELOPMENT CODES) 2008 - REG 2.72

2.72 Development standards

The standards specified for that development are that the development must:

(b) not have an area more than:

(i) if for domestic purposes-20m 2, or

(ii) for any other purpose-30m 2, and

(c) not cause the total area of all such structures on the lot to be more than 15% of the ground floor area of all buildings on the lot, and

(d) not be higher than 3m from ground level (existing), and

(e) be located at least 900mm from each lot boundary, and

(f) be located behind the building line of any road frontage, and

(g) to the extent it is comprised of metal components-be constructed of low reflective, factory pre-coloured materials, and

(h) if it is connected to a fascia-be connected in accordance with a professional engineer’s specifications, and

(i) not interfere with the functioning of existing drainage fixtures or flow paths, and

(j) if it is located on bush fire prone land and is less than 5m from a dwelling-be constructed of non-combustible material, and

(k) if it is constructed or installed on or in a heritage item or a draft heritage item or in a heritage conservation area or a draft heritage conservation area-be located in the rear yard.