PENRITH LOCAL ENVIRONMENTAL PLAN 2010 - REG 7.19 Villages of Mulgoa and Wallacia

PENRITH LOCAL ENVIRONMENTAL PLAN 2010 - REG 7.19

7.19 Villages of Mulgoa and Wallacia

(1) The objectives of this clause are as follows--

(a) to establish specific planning controls for land in the villages of Mulgoa and Wallacia,

(b) to protect residential amenity by prescribing minimum dimensions for dual occupancy and the creation of new lots through subdivision.

(2) This clause applies to land in the villages of Mulgoa and Wallacia, identified as "Mulgoa Wallacia Villages" on the Clause Application Map .

(3) Despite any other provision of this Plan, development consent must not be granted for dual occupancy on land to which this clause applies unless the lot on which the development is to be constructed would have the minimum standards set out in the following Table--

Zone	Minimum standards
Any land not connected to a reticulated sewer (regardless of zone)	Minimum lot size--2 hectares Minimum lot width--30 metres
Land in Zone RU5 Village	Minimum area (attached dwellings)--650 square metres Minimum width (attached dwellings)--15 metres Minimum area (detached dwellings)--750 square metres Minimum width (detached dwellings)--15 metres
Land in Zone R5 Large Lot Residential	Minimum lot size--4000 square metres Minimum width--30 metres
Land in Zone E4 Environmental Living	Minimum lot size--2 hectares Minimum lot width--30 metres

(4) Despite any other provision of this Plan, development consent must not be granted for the subdivision of land to which this clause applies unless all the lots to be created by the subdivision would have the minimum standards set out in the following Table--

Zone	Minimum area and dimensions
Land in Zone RU5 Village (identified as Area 1 on the Lot Size Map )	Standard lot-- Minimum area--550 square metres Minimum width--15 metres Minimum depth--30 metres
	Battle axe lot-- Minimum area--650 square metres Minimum width--18 metres Minimum depth--30 metres
Land in Zone RU5 Village (identified as Area 2 on the Lot Size Map )	Maximum density--1 lot per 2000 square metres Standard lot-- Minimum area--550 square metres Minimum width--15 metres Minimum depth--30 metres
	Battle axe lot-- Minimum area--650 square metres Minimum width--18 metres Minimum depth--30 metres
Land in Zone R5 Large Lot Residential	Minimum area--4000 square metres Minimum width--30 metres Minimum depth--75 metres
Land in Zone E4 Environmental Living	Minimum area--1 hectare Minimum width--30 metres Minimum depth--75 metres

Note : Minimum lot sizes are indicated on the Lot Size Map . Lots must meet standards for area, width and depth. Meeting the standards for just width and depth is not sufficient.