New South Wales Consolidated Regulations

LOCAL GOVERNMENT (MANUFACTURED HOME ESTATES, CARAVAN PARKS, CAMPING GROUNDS AND MOVEABLE DWELLINGS) REGULATION 2005 - REG 67

67 Compliance plate

(1) A compliance plate must be attached to an accessible part of each of the following structures:

(a) a manufactured home,

(b) an associated structure that forms part of a manufactured home,

(c) an associated structure comprising a free-standing garage.

(2) A compliance plate must specify the following:

(a) the name of the manufacturer of the manufactured home or associated structure,

(b) the unique identification number for each major section of the manufactured home,

(c) the month and year during which the manufactured home or associated structure was constructed,

(d) the design gust wind speed for the manufactured home or associated structure,

(e) a statement that the manufactured home or associated structure complies with the requirements of this Division,

(f) the name of the practising structural engineer by whom the engineer’s certificate has been issued in respect of the manufactured home.

(3) A unique identification number must be permanently marked on each major section of the manufactured home.

(4) The Minister may, by order published in the Gazette, issue specifications for the design, construction, issue and registration of compliance plates for the purposes of this clause.

(5) A compliance plate must be designed, constructed, issued and registered in accordance with any specifications in force under this clause.