New South Wales Consolidated Regulations
[Index]
[Table]
[Search]
[Search this Regulation]
[Notes]
[Noteup]
[Previous]
[Next]
[Download]
[Help]
ELECTRICITY SUPPLY (CORROSION PROTECTION) REGULATION 2008 - REG 3
Definitions
3 Definitions
(1) In this Regulation:
"approval" means an approval in force under Part 2.
"approved system" means a corrosion protection system the subject of an
approval.
"Department" means the Department of Water and Energy.
"Director-General" means the Director-General of the Department.
"Director-General’s guidelines" means the guidelines for the time being
approved by the Director-General under clause 13.
"foreign structure", in relation to a corrosion protection system, means any
metallic structure (other than the primary structure for that system) that is
situated in the vicinity of the system, whether in or on the ground or in or
on water.
"interference test" means an electrical test that indicates the risk of
corrosion to a foreign structure by a corrosion protection system.
"primary structure", in relation to a corrosion protection system, means the
structure that the corrosion protection system is installed to protect.
"the Act" means the Electricity Supply Act 1995 .
(2) A person is taken to
operate a corrosion protection system for the purposes of this Regulation if:
(a) the person has control over a corrosion protection system that has been
installed to protect a structure, and
(b) current flows between the system
and the structure.
(3) Notes in this Regulation do not form part of this
Regulation.
[Index]
[Table]
[Search]
[Search this Regulation]
[Notes]
[Noteup]
[Previous]
[Next]
[Download]
[Help]