COPYRIGHT REGULATIONS (AMENDMENT) 1990 NO. 301 

COPYRIGHT REGULATIONS (AMENDMENT) 1990 NO. 301 
- TABLE OF PROVISIONS

1.  Commencement  
2.  Amendment  
3.  Regulation 17 (Circumstances in which design is to be deemed to be applied industrially)  


1990 No. 301 COPYRIGHT REGULATIONS (AMENDMENT)
- REG 1
1. Commencement


  1.1 These Regulations commence on the date of commencement of section 11 of
the Copyright Amendment Act 1989.


1990 No. 301 COPYRIGHT REGULATIONS (AMENDMENT)
- REG 2
2. Amendment


  2.1 The Copyright Regulations are amended as set out in these Regulations.


1990 No. 301 COPYRIGHT REGULATIONS (AMENDMENT)
- REG 3
3. Regulation 17 (Circumstances in which design is to be deemed to be applied
industrially)


  3.1 Omit the regulation, substitute:
Circumstances in which design is taken to be applied industrially
  "17. (1) For the purposes of section 77 of the Act, a design is taken to be
applied industrially if it is applied:
  (a)  to more than 50 articles; or
  (b)  to one or more articles (other than hand-made articles) manufactured in
lengths or pieces.
  "(2) For the purposes of paragraph (1) (a), any 2 or more articles:
  (a)  that are of the same general character; and
  (b)  that are intended for use together; and
  (c)  to which the same design, or substantially the same design, is
applied;
are taken to constitute a single article.
  "(3) For the purposes of this regulation, a design is taken to be applied to
an article if:
  (a)  the design is applied to the article by a process (whether a process of
printing, embossing or otherwise); or
  (b)  the design is reproduced on or in the article in the course of the
production of the article.".


- NOTES


1990 No. 301*1* COPYRIGHT REGULATIONS*2* (AMENDMENT)



*1* Notified in the Commonwealth of Australia Gazette on 28 September 1990.
*2* Statutory Rules 1969 No. 58 as amended to date. For previous amendments
see Note 2 to Statutory Rules 1990 No. 4 and see also Statutory Rules 1990
Nos. 4, 5 and 76.