NATIONAL MEASUREMENT REGULATIONS 1999 - REG 27 Accuracy of Inspectors' Class 1 standards of measurement -- maximum permissible uncertainty

NATIONAL MEASUREMENT REGULATIONS 1999 - REG 27

    For paragraph   19(1) (e), the accuracy with which an Inspectors' Class 1 standard of measurement is verified must be expressed as an uncertainty that does not exceed:

  (a)   for a standard for the measurement of length of a denomination stated in column 1 in Schedule   7 -- the maximum permissible uncertainty stated for the denomination in column 2 in that Schedule; or

  (b)   for a standard for the measurement of area of a denomination stated in column 1 in Schedule   8 -- the maximum permissible uncertainty stated for the denomination in column 2 in that Schedule; or

  (c)   for a standard for the measurement of mass of a denomination stated in column 1 in Schedule   9 -- the maximum permissible uncertainty stated for the denomination in column 2 in that Schedule; or

  (d)   for a standard for the measurement of volume of a denomination stated in column 1 in Schedule   10 -- the maximum permissible uncertainty stated for the denomination in column 2 in that Schedule; or

  (e)   for a standard for the measurement of area, mass or volume of a denomination not stated in column 1 in Schedule   8, 9 or 10 -- the maximum permissible uncertainty appropriate to the denomination when linear interpolation is applied to the maximum permissible uncertainty stated:

  (i)   for a standard for the measurement of area -- in column   2 in Schedule   8 ; or

  (ii)   for a standard for the measurement of mass -- in column   2 in Schedule   9; or

  (iii)   for a standard for the measurement of volume -- in column   2 in Schedule   10 .