Australian Capital Territory Repealed Regulations

This legislation has been repealed.

BUILDING REGULATIONS 1972 (REPEALED) - REG 9

    (1)     For the Act, section 33A (3) (e), the following are prescribed requirements in relation to an application in relation to building work that involves the erection or alteration of a building:

        (a)     the application shall specify the class of the building, as provided by the building code, according to the intended use of the building as proposed to be erected or altered;

        (b)     the application shall specify, in accordance with the classification provided by the building code, the type of construction of the building as proposed to be erected or altered;

        (c)     if an application relates to the erection or alteration of a class 1 or class 10a building, the application shall set out, in accordance with the classification provided by the building code, the site classification of the parcel of land;

        (d)     if an application relates to the alteration of a building—the application shall specify—

              (i)     the class and type of construction of the existing building classified as provided by the building code according to occupancy; and

              (ii)     the materials used in the existing building;

        (e)     the application shall specify the number of storeys of the building as proposed to be erected or altered;

        (f)     the application shall specify the number of new dwellings (if any) created by the building work;

        (g)     the application shall specify the floor area of the proposed building or proposed new part of the building, as the case requires;

        (h)     the application shall specify the materials to be used in the frame, floor, walls and roof of the proposed building or proposed new part of the building, as the case requires;

              (i)     if it is proposed that an alternative solution be used to comply with a performance requirement of the building code—the application shall specify—

              (i)     the performance requirement; and

              (ii)     the alternative solution; and

              (iii)     each assessment method used to show that the alternative solution complies with the performance requirement;

        (j)     if the building code does not specify a standard of work in relation to any part of the proposed building work and it is intended to carry out that part of the proposed building work in accordance with a standard of work specified in another document—the application shall specify—

              (i)     the nature of the proposed building work; and

              (ii)     the title of the document; and

              (iii)     each assessment method used to show that the proposed building work complies with the standard of work specified in the document.

    (2)     In this regulation:

"assessment method"—see the building code.

"performance requirement"—see the building code.